Panasonic CF-18 Series Reference Manual page 37

Security Measures
When you do not want your computer to be used without
permission
Setting the Password on boot (enabling, disabling)
When you do not want the User Password enabled or changed without permission:
A Run the Setup Utility and enter the Supervisor Password.
B
Go to [Security] menu. Using
press Enter.
C
Using either
When [Password on boot] is set to [Enable], it is impossible to start the computer without the
password.
NOTE
You cannot use [Password on boot] without setting the Supervisor Password. Set the
Supervisor Password if you have not done so. (
When starting up the Setup Utility, the password input screen will be displayed if a
Supervisor Password or Use Password has been set, even if [Password on boot] is set
to [Disable].
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Select [Enable] or [Disable].
To enable the Password on boot
Select [Enable] and press Enter.
To disable the Password on boot
Select [Disable] and press Enter.
and , select [User Password Protection] and
, select [Protected] and press Enter.
or
page 77)
or , select [Security].
or , select [Password on boot] and press
37
page 34)
Enter
.