Table of Contents
Advertisement
STEP
B7
STEP
B8
While pressing up, twist the dome window/locking
ring clockwise approximately 1/4 turn.Verify that the
arrowheads on the green labels have mated.The
camera will initialize 10 seconds after it is properly
installed.
An optional tamper clip is provided to prevent the
dome from being removed.To install, locate blue
label, orient the tamper clip with the 2 tabs pointing
up, and press the tamper clip into the locking ring
just to the right of either blue label. A straight blade
screwdriver will help push the clip in place.
27
Hide quick links:
Advertisement
Table of Contents
