Philips G3 EnviroDome Instruction Book page 14

STEP
A9
Writing the address on masking tape and stick-
ing it to the dome will help avoid confusion
when installing the dome.
The dome is now ready to be installed using an
appropriate G3 mount!
ATTENTION: Installation should
be performed by qualified service per-
sonnel only, in accordance with the
National Electrical Code or applicable
local codes. Refer to applicable instal-
lation section.
The G3 AutoDome can be mounted to a wall, mast
(pole), roof, pipe, or a corner mount.You must have
installed the appropriate mount before installing the
AutoDome. Each mount includes its own mounting
instructions.
13