Underfloor Weighing - KERN 440 Operating Instruction

6.9 Underfloor weighing

Objects unsuitable for placing on the weighing scale due to size or shape may be
weighed with the help of the flush-mounted platform.
Proceed as follows:
•
Switch off balance.
•
Turn round the balance.
•
Open the closing lid (1) on the bottom of your balance.
•
Screw-in the hook for underfloor weighing (2) carefully and completely till to
the stop (do not screw-in farther, as this will damage the balance).
•
Place your balance over an opening.
•
Suspend the goods to be weighed from the hook and carry out the weighing.
1
Fig. 1: Setup of balance for underfloor weighing
• For underfloor weighing use the original hook provided by KERN.
• Always ensure that all suspended objects are stable enough to hold the desired
goods to be weighed safely (danger of breaking).
• Never suspend loads that exceed the stated maximum load (max) (danger of
breaking)
Always ensure that there are no persons, animals or objects that might be damaged
underneath the load.
After completing the underfloor weighing the opening on the bottom of the balance
must always be closed (dust protection).
14
CAUTION
!
NOTICE
!
2
440-BA-e-0941