Maintenance And Care; Emptying The Dirt Container - Bissell 78E9 SERIES User Manual

Pethair eraser; cleanview power dual cyclonic; cleanview dual cyclonic pet
Hide thumbs Also See for 78E9 SERIES:
Table of Contents

Advertisement

M
aintenance and care

Emptying the dirt container

Empty the dirt container as soon as
the dirt reaches the "FULL" lines on
the sides of the dirt container.
1. Unplug the vacuum from the electrical
outlet.
2. Press the dirt container release button
located on the back of the carry handle
and lift up to remove.
3. Choose an emptying method. Method
#2 is recommended for allergy sufferers.
Method #1 – Hold the dirt container over
a trash can and push the emptying
button located on the back bottom of
the dirt container to open the bottom
door. Close the door after the dirt
empties and make sure it clicks back
into the locked position.
Method #2 – Place a plastic bag over the
bottom of the dirt container. Push the
emptying button, located on the back
bottom of the dirt container, through
the plastic to open the bottom door.
After the dust settles, remove the
plastic bag to discard. Close the
door and make sure it clicks back
into the locked position.
Cleaning the inner cyclone & screen
Filters protect the motor from
dirt and dust particles. Use only
BISSELL replacement filters in your
.
vacuum
1. Unplug the vacuum from the electrical outlet.
2. Remove the dirt container from the vacuum.
3. Remove the top portion of the dirt
container by grasping the carry handle
and turning counter clockwise and pulling
up and out of the dirt container.
9
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of electric
shock, turn power switch OFF and
disconnect plug from electrical
outlet before performing mainte-
nance or troubleshooting checks.
2.
3.
Emptying
Button
3.
Dirt Container
Release Button

Advertisement

Table of Contents
loading

Table of Contents