Using your Hudson’s magnetic tender coupler Your Hudson’s Railsounds II system—the basics Experiencing the range of your Hudson’s Railsounds II system Notes on Railsounds II Installing the Lionel no. 5906 sound activation button TrainMaster Command operations ® The command control environment...
Conventional operations Readying your Lionel Hudson for operation o operate your Lionel Hudson, mend the Lionel TrainMaster Com- place it on Lionel or Lionel-compat- mand model railroad control system. ible O gauge With track three-rail track. power OFF, con- Make...
UCS’ coil and press by Lionel in 1950. Uncouple on the UCS controller. The Lionel magnetic couplers react to the magnetic field pulls the disc downward, magnetic field generated by a Lionel and the knuckle opens.
Page 5
Your Hudson’s Railsounds II system—the basics ionel Railsounds II is the most realistic track power, the Hudson’s Railsounds model railroad sound system in the II system produces sounds of the loco- world. Your Hudson features digital sam- motive at rest. As the Hudson moves, ples from a c h u f f i n g real-life Hud-...
Conventional operations Experiencing the range of your Hudson’s Railsounds II system ith Railsounds II, you experience down your track, wait for 3.5 seconds, the sounds of real railroading like and listen for the air-release sound— never before. Simply put, it’s the most that’s the Hudson telling you its sophisticated, authentic model railroad Liontech Command reverse unit has...
IONEL NO 10-5906-001 10-5906-001 SOUND ACTIVA SOUND ACTIVA TION BUTTON TION BUTTON The no. 10-5906-001 button works with any Lionel AC trans- Note! former except no. 6-4690 Type MW. Transformers made by other manufacturers may not be compatible with Railsounds II.
TrainMaster Command is the ID#). When a locomotive hears its ID#, it advanced model railroad control sys- responds. Choose your CAB-1 command. tem from Lionel Trains and Liontech. Your Command-equipped Hudson really Your Hudson is outfitted with the is at your command.
CAB-1 commands for your Hudson Press WSTL/HRN UDSON AILSOUNDS to activate the Hud- SOUNDS IN BOLD ITALIC son’s whistle, release to discontinue. M ULTI ® HISTLE STEAM WHISTLE SOUND Coupler commands Press BELL once to have no effect on activate bell, your Hudson’s mag- again to discontinue.
TrainMaster Command operations CAB-1 numeric keypad commands for your Hudson AUX1 hen you press AUX1 on CAB-1, (SW, ACC, RTE, TR, or ENG). The you turn the numeric CAB-1 keypad overlays in- keypad into 10 command but- cluded with your Hudson are tons.
Tuning your Hudson’s performance MOMENTUM Get your locomotive moving, then Simulate the labored performance of press SET; the Hudson will stop. Turn a locomotive pulling a heavy load with the throttle clockwise to get the engine momentum. Press L, M, or H (located moving, then decrease speed until the under CAB-1’s removable panel) for locomotive just stops.
TrainMaster Command operations Assigning your Hudson a new ID# s your Lionel Command-equipped Assign a new ID# fleet grows, you’ll want to give Example to your Hudson your Hudson a more individualized ID#. Choose from any between 1 and Command Base ON 99.
Maintaining and servicing your Hudson Lubricating your Hudson elp your Lionel Hudson lead a long your track. and productive life on your rail- You’ll know your Hudson requires road by maintaining it properly. lubrication when visual in-spection We recommend you pur-...
The shipment must be prepaid call (810) 949-4100, fax (810) 949-5429, and we recommend it be insured. or write Lionel Service, P. O. Box 748, New Baltimore, MI 48047-0748. State Please follow the instructions care- the Hudson’s problem and when you fully before returning your Hudson.
Need help?
Do you have a question about the Hudson 4-6-4 Steam Locomotive and is the answer not in the manual?
Questions and answers