Philips HR2357 User Manual page 11

Put the shaping disc onto the disc holder ❶ , and make sure it is firmly fixed on the
4
disc holder
Note:
• Make sure the inner cavity
of the shaping disc and
disc holder is properly
fitted.
5
Attach the front panel to the main unit.
Disc holder safety switch lever
Note:
• Make sure the front panel is completely fastened
before using the appliance.
• The front panel is heavy. Take extra caution when
assembling it.
6
Fasten the front panel control knobs.
Note:
• If the front panel or the shaping disc is not properly
assembled, the safety switch will prevent the
appliance from working.
7
Close the mixing chamber lid properly.
Note:
• If the mixing chamber lid is not properly installed,
the safety switch will prevent the appliance from
working.
.
1 2
1
1
ENGLISH
2
11