Targa external network hard disk User Manual page 34

Targa NDAS 500 eSATA
File system
If you are using the Targa DataBox only with a modern operating system, we
recommend that the file system is in NTFS configuration (standard setting).
Allocation unit size
Depending on the use of the hard disk, you can select the cluster size of the partition
between 16KB and 4096KB here. A cluster is the smallest possible size of data. If you
want to save very large files, a higher value is recommended. If you want to save many
small files, select a lower value. You are recommended to leave the setting here on
"Default".
Volume label
Give the logical drive any meaningful name (in our example, "New Volume").
Perform a quick format
When you format quickly detection of defective sectors remains unchecked and is
therefore faster. If you do not want to carry out this revision, mark a tick in the box to
format faster.
Enable file and folder compression
With this option all saved data is automatically compressed (made smaller). This
means you will have more free storage space but also slower access speed.
In this option you can add
further entries to the logical
drive.
If you are not sure, leave all
settings and confirm the setting
with Next.
English
33