Targa external network hard disk User Manual page 26

Targa NDAS 500 eSATA
To create a group, the corresponding Databoxes must be connected via an accessible
network, but not mounted on the connected computer. Additionally, the write access
key must be entered upon registering.
Click on "NDAS Bind
Management" in the Program
folder.
A window with a list of all NDAS
devices is displayed. The status
should show "Ready". If this is
not the case, the Databoxes
should be firstly disconnected
from all computers.
Click on the "Bind" button to
start the RAID configuration.
The Wizard for the
configuration will appear. Click
Next.
English
25