Targa DataBox V 320 English Table of Contents GENERAL INFORMATION System Requirements ....................3 Package contents......................3 CE Declaration of Conformity..................3 Disposal of Old Devices ....................3 Trademarks ........................3 TECHNICAL SPECIFICATIONS Intended Use........................4 IMPORTANT SAFETY INSTRUCTIONS Maintenance and care....................6 GETTING STARTED Connecting via a USB Cable..................
Keep this manual in a safe place for future reference. If you sell or pass this device on to another person, it is imperative that you also hand over this manual. Your Targa DataBox is an external hard disk drive that lets you enlarge your computer's storage capacity for saving and managing documents, videos, music files, photographs, graphics, etc.
Targa DataBox V 320 English System Requirements The minimum system requirements are: Computer with: Pentium or other compatible processor, or higher ® ® Microsoft Windows Vista™, Windows XP, Windows 2000 ® 128 MB RAM or higher, according to the requirements of Windows Available USB 1.1 or 2.0 port or eSATA connector...
2,5A Intended Use The Targa DataBox has been developed for data backup and data transfer from or to a PC or notebook with USB ports or eSATA connection for indoor operation. If used for non-intended purposes or if the housing is opened, the warranty is rendered void. The Targa DataBox in its default configuration has not been designed for medical, lifesaving, rescue or life-maintaining purposes.
Targa DataBox V 320 English Important Safety Instructions Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. Keep this manual in a safe place for future reference. If you sell or pass this device on to another person, it is imperative that you also hand over this manual.
Do not remove any cables before properly shutting down the device in the operating system (see page 11 – Disconnecting). Place the Targa DataBox in a safe position so it cannot fall over. Use the stand supplied. Maintenance and care...
Targa DataBox V 320 English Getting Started Please read this user manual before using the device for the first time. This prevents incorrect operation and use. Unpack the Targa DataBox and keep the packaging. Front view Back view LED indicator...
Targa DataBox V 320 Connect the Targa DataBox to the supplied power adapter [A], by inserting the power adapter connector [6] into the connector port [3] of the Targa DataBox. Plug the power adapter into a wall outlet. Connecting via a USB Cable Insert the flat connector [8] of the USB cable [B] into a free USB port on your desktop PC or notebook.
The Targa DataBox is designed for the eSATA standard and therefore offers also "Hot Swap" technology. This means that you can connect and disconnect the Targa DataBox from your computer without having to shut down the operating system.
It is therefore not necessary to format again if you do not wish to change the file system or the partitioning. Note: If you format the Targa DataBox all data saved onto the hard disk will be deleted. Make backup copies of all data that you wish to use again after the formatting.
English Disconnecting The Targa DataBox can be connected to, and removed from, the computer while the computer is powered on. However, if you remove the DataBox from the computer without stopping it properly from the operating system, file damage or loss of data may result.