Building In; Installation Instructions - Atag HG42 C Instructions Manual

INSTALLATION INSTRUCTIONS

Preparing the hob
Only for France:
Cut opening in worktop
Fit the elbow supplied on the appliance's gas connection.
1/2" ISO 228 (straight)
1/2" ISO 10226-1 (conical)
Sealing ring
1/2" ISO 228 (straight)
1/2" ISO 228 (straight)
Sealing ring
• Saw the opening in the worktop. This should be done very
accurately (see building in dimensions).
• If the woodtop is made of treated wood, then coat the sawn
surfaces of the top with sealing varnish, to prevent moisture
causing the top to swell.
GB 24

Building in