General - Atag HG42 C Instructions Manual

INSTALLATION INSTRUCTIONS
Gas connection
Electrical connection
This appliance should only be connected up by a registered installer!
Caution!
The type of gas and the country for which the appliance has been
designed are indicated on the application identification card.
This is a category 3 appliance.
• The gas connection must comply with national and local
regulations.
• We recommend that the hob be connected by means of a fixed
pipe. Connection using a specially designed safety hose is also
permitted.
• Behind an oven use must be made of a pipe made entirely out of
metal.
Warning!
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• In all cases the connection tap for the appliance must be
positioned such that it is easily accessible.
• Before using the appliance for the first time check the
connections using water and washing-up liquid to ensure that
there are no gas leaks.
230V - 50Hz - 1.1 VA (for ..B appliances)
230V - 50Hz - 5.1 VA (for ..C appliances)
• The electrical connection must comply with national and local
regulations.
• Wall socket and plug must be accessible at all times.
• If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in
the supply cable.
GB 22

General