General - Atag HG42 C Instructions Manual

INSTALLATION INSTRUCTIONS
• Do not use an adapter or an extension lead to connect the device
to the electrical mains. Safe use of the device cannot be guaranteed
with these accessories.
Warning!
This appliance must be earthed.
Installation, maintenance or repairs should only be carried out by
professionals who are authorized by the manufacturer, as failure to do
so will void the warranty.
The device should be disconnected from the mains prior to
installation, maintenance or repairs. The device is only disconnected
from the electric power if:
• the main switch of the electrical wiring/installation in the house is
switched off, or
• the fuse for the electrical wiring/installation in the house has been
completely removed, or
• the plug has been pulled out of the socket.
Faulty parts may only be replaced by original Atag parts. Only those
parts are guaranteed by Atag to meet the safety requirements.
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer's service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
GB 23

General