Controls - Atag HG42 C Instructions Manual

CONTROLS

Igniting and adjusting
HG62..B/HG77..B/HG92..B/HG97..B
HG62..C/HG77..C/HG92..C/HG97..C
Flame failure device
Igniting, adjusting and flame failure device
Each burner can be adjusted continuously between the high and low
positions.
1
1. 0-setting
2. Burner indication
3. Low setting
4. High setting
3
4
2
1
3
4
2
Your gas hob has a flame failure device. This ensures that the gas
supply is shut off if the flame goes out during cooking.
Operating the thermal flame failure device
(HG62..B/HG77..B/HG92..B/HG97..B)
Press the control knob and turn it anti-clockwise. Hold the control
knob pressed (in the high setting) for approximately 3 seconds after
the burner has ignited.
The flame failure device switches on.
GB 9