Connecting The Satellite (Front, Center, Surround) Speakers - JVC SP-PWS5 Instructions Manual

Connections
Connecting the satellite (front, center, surround)
speakers
Note that the illustration below is for TH-S5.
Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.
Powered subwoofer
( )
TH-S5: SP-PWS5
TH-S51: SP-PWS51
4 m
Center speaker
(
TH-S5: SP-THS5C
TH-S51: SP-THM303C
*1
For TH-S5
Silver Copper
Red
Black
CAUTION
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
9
4 m
Front speakers
1
( )
TH-S5: SP-THS5F *
2
TH-S51: SP-THM303F *
10 m
1
)
*
2
*
*2
For TH-S51, the satellite speakers are equipped with their speaker cords attached
directly to their speaker unit instead of having speaker terminals on their cabinet.
Speaker cord (supplied)
• Connect the silver cords to the black (r) terminals.
• Connect the copper cords to the (q) terminals
referring to the table below:
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
Surround speakers
(
TH-S5: SP-THS5S
TH-S51: SP-THM303S
Front/Center
speakers
• When installing the satellite speakers on the wall;
Be sure to have them installed on the wall by a qualified personnel.
•
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.
Care must be taken in selecting a location for speaker installation
•
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
White
Red
Green
Blue
Gray
1
)
*
2
*
Surround
speakers