Connecting The Satellite (Front, Center, Surround) Speakers - JVC TH-S7 Instructions Manual

Connections
Connecting the satellite (front, center, surround)
speakers
Before connecting the
speaker cords;
Twist and pull the insulation coat
off and remove.
Powered subwoofer
SP-PWS9
Front speakers
SP-THS9F
CAUTION
• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
Speaker cord (supplied)
• Connect the silver cords to the black (r) terminals.
• Connect the copper cords to the (q) terminals referring to the table below:
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
4 m 10 m
This page is for
White
Red
Green
Blue
Gray
Center speaker
SP-THS9C
4 m
Copper
Continued on next page
Red
Black
Silver
Surround speakers
SP-THS9S
10