andrews 32/143 Installation Manual, Operation And Service Manual page 64

APPENDICES
1. Max Setpoint (Display/Change)
2a. Water Temperature Average (Displays average if there are two sensors - sensor temperature displayed if single
sensor is used).
2b. Water Temperature - Upper Sensor (Displays if there is an upper sensor - some models)
2c. Water Temperature - Lower Sensor (Displays if there are two sensors)
Max Setpoint value in
Water Heater Display
Max
°F
Setpoint
idle
Operational
Status
SELECT SET
Water Temp
°F
idle
Status Operational
SELECT SET
°F
idle
Status Operational
Upper Sensor
SELECT SET
°F
idle
Status Operational
Lower Sensor
SELECT SET
Page 10
64
Troubleshooting