Release Notes - CipherLab 1560 User Manual

RELEASE NOTES

Version Date
1.05 Apr. 09, 2010
1.04 Mar. 02, 2010
1.03 Oct. 30, 2009
Notes
Modified: 1.1.2 Auto Power Off & Power-Saving
Modified: 2.1.1 Activate BT HID & Select Keyboard Type — add
Turkish
Modified: 2.1.3 Keyboard Settings — BT HID supports "Alphabets
Layout"
Modified: 2.1.5 HID Character Transmit Mode
Modified: 2.2 BT SPP Slave
Modified: 2.3 BT SPP Master
Modified: 2.4.1 Activate Keyboard Wedge & Select Keyboard Type
— add Turkish
Modified: 2.5.2 Baud Rate — add setup label for 4800 bps
(100100)
Modified: 2.5.2 Baud Rate — change default baud rate to 115200
bps
Modified: 2.6.1 Activate USB HID & Select Keyboard Type — add
Turkish
Modified: 2.6.2 Keyboard Settings — USB HID supports "Alphabets
Layout"
Modified: 2.6.4 HID Character Transmit Mode
New: 3.1.3 Configure Related Settings — Sniff Mode
Modified: 4.9.4 Security Level
Modified: Appendix III Keyboard Wedge Table — remove settings
for user-defined scan code
Modified: Appendix III Keyboard Wedge Table — provide new
examples
Modified: Charging the Battery via 3656 — suggest connecting
power cord for USB
Modified: 1.10 Auto-Sense Mode (1560 Only) — Continuous mode
as an alternative
Modified: 1.13 Symbologies Supported — ISBT 128 enabled by
default
Modified: 5.2.2 Symbologies for Character Substitution (All 3 Sets)
— add ISBT 128
Modified: 5.4.1 Select Pre-defined Code ID — add ISBT 128
Modified: 5.4.2 Change Code ID — add ISBT 128
Modified: 5.5 Length Code — add ISBT 128
Modified: 6.3.1 Applicable Code Type (for Editing Format) — add
ISBT 128