Turn Signal And Headlights - Honda 2005 Civic Owner's Manual

Turn Signal and Headlights

Turn Signal
1.
2. Off
3. Parking and indicator lights
4. Headlights on
High beams
5.
Flash high beams
6.
62
Turn Signal Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
Turning the
Headlights On
switch to the '' '' position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the ''
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder tone when
you open the driver's door.
High Beams Push the lever
forward until you hear a click to turn
on the high beams. The blue high
beam indicator will come on (see
page 55 ). Pull the lever back to
return to the low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Daytime Running Lights
Canadian models only
With the headlight switch off, the
high beam headlights and the high
beam indicator come on with
reduced brightness when you turn
the ignition switch to ON (II) and
'' release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.