Honda 2005 Civic Owner's Manual page 171

Lights
Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
1. If you are changing the bulb on
the driver's side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger's side, turn
the steering wheel to the left.
172
BULB
2. Use a flat-tipped screwdriver to
remove the holding clip from the
inner fender, and pull the inner
fender cover back.
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Remove the bulb from the socket
by pushing it in and turning the
bulb counterclockwise until it
unlocks.
5. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket back into the
6.
headlight assembly. Turn it
clockwise to lock it in place.
SOCKET
7. Put the inner fender cover in place.
Install the holding clip. Lock it in
place by pushing on the center.