Main Menu
Table of Contents
1.
Turn signal
2.
Off
3.
Parking and interior lights
4.
Headlights
High beams
5.
6.
Flash high beams
Push down on the
Turn Signal
−
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
Turning the switch to
Headlights
−
the ''
'' position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate lights.
Turning the switch to the ''
position turns on the headlights.
When the light switch is in the
''
'' or ''
'' position, the
lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position.
Turn Signal and Headlights
If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver's
door.
High Beams
−
Push the lever
forward until you hear a click. The
high beam indicator will come on
(see page
60
). Pull it back to return
to low beams.
To flash the high beams, pull the
lever back lightly, then release it.
''
The high beams will stay on as long
as you hold the lever back.
73