Turn Signal And Headlights - Honda 2004 Civic 3-Door Online Reference Owner's Manual

Table of Contents Table of Contents

Turn Signal and Headlights

1. Turn Signal
2. Off
3. Parking and interior lights
4. Headlight on
5. High beams
6. Flash high beams
Push down on the
Turn Signal
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to the
center when you release it or
complete a turn.
Headlights Turning the switch to
the '' '' position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate lights. Turning the
switch to the '' '' position turns
on the headlights. If you leave the
lights on with the key removed from
the ignition switch, you will hear a
reminder tone when you open the
driver's door.
Turn Signal and Headlights
Push the lever back
High Beams
until you hear a click to turn on the
high beams. The blue high beam
indicator will come on (see page
Pull the lever back again to low
beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Daytime Running Lights
Canadian model only
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
53 ).
61