Honda 2005 Civic Owner's Manual page 94

Playing the Radio
If you do nothing, the system will
then scan for the next strong station
and play it for 5 seconds. When it
plays a station that you want to listen
to, press the SCAN button again.
Preset Each preset button can
store one frequency on AM, and two
frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
2. Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
94
The preset frequencies will be lost
if your vehicle's battery goes dead,
is disconnected, or the radio fuse
is removed.
On models with in-dash CD changer
To select a different preset
frequency, you can also use the
Preset CALL bar. Press the ''
side of the bar to select the
frequency stored in the next preset
button, and press the ''
select the frequency in the previous
preset button.
AUTO SELECT If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ''A.SEL''
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM, and twelve FM stations in
the preset buttons.
You will see a ''0'' displayed after
pressing a preset button if Auto
''
Select cannot find a strong station
for every preset button.
'' side to
If you do not like the stations Auto
Select has stored, you can store
other frequencies on the preset
buttons as previously described.
To turn off Auto Select,
A. SEL button. This restores the
presets you originally set.
press the