Status Indicators; Led Status - Datalogic Lynx User Manual

USE AND FUNCTIONING
4.5

STATUS INDICATORS

4.5.1

LED Status

The Lynx provides three different LEDs signaling the PDA status.
LED
Good Read
(right side)
Charging Status
(left side)
Keyboard Status
(center)
STATUS
Red
Green
Green
Red
Red blinking
Amber
Off
Yellow solid
Blue solid
Sky blue solid
Scanning LED is ON from the time the
user hits the scan button or side trigger
buttons until the bar code is decoded.
Scanning LED is ON, showing a good
decode.
It is constant once the charging process
has been completed (full charge).
It is constant while charging.
In case of charge fault it is constant for
two hours, then it starts blinking.
It is constant when charging a severely
discharged main battery until the battery
has sufficient charge for its controller to
begin communicating with the Lynx's
power system. Once the battery is
communicating, the charge LED will
switch to glow red and continue charging
normally.
Keyboard in primary.
Yellow alternate key mode.
Blue alternate key mode
CapsLock enabled.
4
47