Wwan Connection - Datalogic Lynx User Manual

3
3.6

WWAN CONNECTION

Lynx 3G/4G HSPA+ models enhance your connectivity solutions giving you an
opening to an international wireless infrastructure that is the global standard.
Lynx uses the following bands:
UMTS/HSPA+: 800/850/900/1900/2100MHz
-
GSM/GPRS/EDGE 850 900 1800 1900 MHz.
-
In order to use a WWAN Connection you have to install a SIM Card (see instructions
on par. 1.5).
In order to avoid wasting energy, the phone module is off by default.
If you need to have the phone working, the module must be powered
on using the Wireless Manager applet (see par. 4.6.6).
NOTE
Suspending the terminal does not power off the phone radio and the
phone remains connected to the cellular network ready to accept
incoming telephone calls. To prolong autonomy on battery power,
you may turn the phone off when it is not needed using the Wireless
NOTE
Manager applet.
The phone voice capability of this PDA has to be addressed to
occasional use, in well covered areas.
If the coverage is poor, the voice quality can be highly affected.
NOTE
30
1 LYNX™