4-8-2. Focus Brush Position Adjustment and Pattern Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Adhesive bond (B-10)
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1)
Set the checking lens into the state of Fig.4-8-5 (zoom barrel was removed).
Note:
Check that the focus FPC is soldered to the main FPC assembly.
Light Interception
Tube Set
Bayonet Mount Set
2)
Reattach the bayonet mount set, light interception tube set and contact board.
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
Contact Board
A
B
Fig. 4-8-5
4-23
A
B
Check that the
focus FPC is soldered
to the main FPC assembly.