Sony SAL75300 Service Manual page 22

HELP16
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to the instruction part of the 4th moving barrel.
Apply the
(All circumference)
HELP17
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
1. Apply the anti-diffusion agent (A-20) to the instruction part of the 3rd lens set.
2. Match the lever of the diaphragm operation plate to the position without projection part of the pressure plate.
3. After the aperture diameter adjustment is completed, apply the adhesive bond (B-10) to the three screws as shown in the figure.
Apply the
adhesive bond (B-10)
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
anti-diffusion agent (A-20)
J-6082-612-A
Apply the anti-diffusion agent (A-20)
(3 areas)
Apply the adhesive bond (B-10)
Apply the anti-diffusion agent (A-20)
(All circumference)
Apply the anti-diffusion agent (A-20)
(All circumference)
Projection part
HELP