Sony SAL75300 Service Manual page 21

HELP15
Grease (G-15):
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
Adhesive bond (B-40):
1. Apply the grease (G-15) and anti-diffusion agent (A-20) to the instruction part of the helicoid barrel.
Apply the anti-diffusion agent (A-20)
(All circumference: 5 mm wide)
2. Apply the adhesive bond (B-40) to the three guide pins fixing the helicoid barrel.
3. After the zoom brush position adjustment is completed, apply the adhesive bond (B-10) to the two screws as shown in the figure.
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
J-6082-619-A
J-6082-612-A
J-6082-614-A
Apply the grease (G-15)
(Liner groove: 6 areas)
Apply the adhesive bond (B-40) (3 areas)
Apply the adhesive bond (B-10)
Apply the anti-diffusion agent (A-20)
(All circumference: 10 mm wide)
HELP