Sony SAL75300 Service Manual page 17

HELP09
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to the instruction part of the 2nd lens lens set and light shield plate assembly.
HELP10
Grease (G-15):
Anti-diffusion agent (A-20): J-6082-611-A
1. Attach the friction sheet-A and friction tape-B as shown in the figure.
2. Apply the grease (G-15) to the instruction part of the focus barrel.
3. Apply the anti-diffusion agent (A-20) to the instruction part of the front barrel
Apply the grease (G-15)
(Gear portion)
Apply the grease (G-15)
(All circumference: 2 mm wide)
4. Insert the front barrel to the focus barrel as shown in the figure.
Guide groove attached
longest projection
Longest projection
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
Apply the anti-diffusion
agent (A-20)
(All circumference)
Apply the anti-diffusion
agent (A-20)
(Affix side)
J-6082-619-A
Friction Tape-B
15 mm
Focus Barrel
2 mm
Friction
Sheet-A
Focus Barrel Block
Apply the anti-diffusion agent (A-20)
(All circumference)
Apply the anti-diffusion agent (A-20)
(All circumference: 6 mm wide)
Front Barrel
Click projection
for attaching hood
HELP