Displaying The Current Time; Return To Tv Channel Instantly; Using The Freeze Function; Using The Pip Function - JVC PD-42V31BUE, PD-42V31BJE, PD-42V31BSE Instructions Manual

Remote control buttons and functions

Displaying the current time

You can display the current time on the screen.
Press the h h (information) button to display the
h h
current time
Pressing the h (information) button changes the display as
follows:
PR LIST
PR ID
AV
BBC1
01
02
03
04
05
06
07
08
09
TV OK
-10 +10
D0011-EN
• This TV uses teletext data to set the current time. If the
TV has not received a TV channel that has teletext
programmes since it was turned on, the time display is
blank. To see the time, choose a TV channel that has
teletext programmes.
• When watching videos, an incorrect current time is
sometimes displayed.

Return to TV channel instantly

You can return to a TV channel instantly.
Press the b b b button b
The TV returns to the TV mode and a TV channel appears.

Using the FREEZE function

You can view the current programme as a still picture.
1 Press the f f button f f
The still picture of the current picture will appear.
current
programme
To cancel the FREEZE function:
Press the f f button, the p p buttons or the number f f
buttons.
• The FREEZE function does not work while a sub-
picture is displayed.
• The still picture cannot be output from the TV.
• The FREEZE function is cleared if no operation is
performed for approximately one minute.
16
12 : 00
No display
still picture
D0056

Using the PIP function

You can view two pictures (Main-picture and sub-picture).
Two different TV programmes can be watched at the same
time, or a TV programme and a video programme from an
external device can be watched at the same time.
1 Press the R R button
R R
Pressing the R R R button changes the PIP mode as follows: R
Twin pictures mode
Main-
picture
Picture in picture mode
Main-
picture
Cancel the PIP function
Main-
picture
D0057
2 Press the p p buttons to change the sub-
p p
picture to the picture from another EXT terminal
Listening to the sound of the sub-picture:
You can listen to the sound of the sub-picture with the
headphones while listening to the sound of the main-
picture from the TV speakers.
For details, see "HEADPHONE" on page 26.
• The sub-picture sound is mono.
Changing the position of the sub-picture:
You can choose one of four positions.
For details, see "PIP (picture-in-picture)" on page 24.
Swapping the main-picture and sub-picture:
Press the g button.
The main-picture and sub-picture will be swapped.
A
A
D0051
Sub-
picture
Sub-
picture
B
B