JVC PD-42V31BUE, PD-42V31BJE, PD-42V31BSE Instructions Manual page 36

INSTALL
DELETE
1 Press the 6 6 6 buttons to choose a TV channel 6
Every time you press the 6 buttons, the programme
number (PR) changes and the picture of the TV channel
stored in the programme number (PR) appears on the
screen.
2 Press the yellow button to delete the TV
channel
The TV channel is deleted from the programme numbers
(PR) list.
MANUAL
Preparation:
• If you register a TV channel (SECAM-L system) from a
French station, be sure to set the COUNTRY setting to
FRANCE. If the COUNTRY setting is not FRANCE,
follow the description "Changing the COUNTRY
setting" on page 36 to change the COUNTRY setting to
FRANCE, then start the MANUAL function.
1 Press the 6 6 buttons to choose a Programme
6 6
number (PR) to which you want to register a
new TV channel
2 Press the blue button to activate the MANUAL
function
MANUAL
PR ID
AV
01 BBC1
02
03
04
05
06
07
08
09
BACK
TV OK
SYSTEM
D0035-EN
To cancel the MANUAL function:
Press the h (information) button.
When the COUNTRY setting is not UNITED
KINGDOM:
At the right side following the CH/CC number, the
SYSTEM (broadcasting system) of the TV channel
appears.
3 When the COUNTRY setting is UNITED
KINGDOM:
Continue to step 4
When the COUNTRY setting is not UNITED
KINGDOM:
Press the 3 3 3 3 button to choose the SYSTEM
(broadcasting system) for a TV channel you
want to register
TV channel (SECAM-L system) from a French
station:
Set the SYSTEM to "L". If it is set to one other than "L",
you cannot receive the TV channel of the SECAM-L
system.
Other TV channels:
If you do not know the correct broadcasting system, set
the SYSTEM to "B/G". If "B/G" is not correct, it results
in the fact that you will not hear the sound normally
when the TV detects a TV channel. In this case, retry to
set the SYSTEM again correctly so that no problem
arises.
34
CH / CC
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
( B / G )
CC 01
CC 02
CC 03
SEARCH +
SEARCH-
FINE +
FINE-
4 Press the green or red button to search for a TV
channel
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
5 Press the green or red button repeatedly until
the TV channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV
channel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and
choose a SYSTEM that has normal sound.
6 Press the a a button and register the TV a a
channel to a programme number (PR)
The normal EDIT menu is resumed.