Adjust the volume
Press the
buttons to adjust the volume.
The volume indicator appears and the volume changes as
you press the
Muting the sound
Press the
(muting) button to turn off the
sound.
Pressing the
(muting) button again restores the previous
volume level.
Watch images from external equipment
Use the AV button:
Press the
AV
button to choose an EXT
terminal.
TV mode
Last
program
VIDEO-1
number
PC
To use the Programme number 0:
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number 0 allows you to
view images from the VCR. Set the VCR RF channel to
the Programme number 0 manually. For details, see
"MANUAL" on page 21.
In the PC mode:
If following message appears, the power lamp blinks in
amber and the TV goes in to reduced power mode.
- "NO SIGNAL"
- "CABLE NO INSERT"
- "OUT OF RANGE"
See "Troubleshooting" on page 30 for detials of this messages.
buttons.
EXT modes
VIDEO-2
Remote control buttons and functions
Displaying the source information
You can display the source information and current time on
the screen.
Press the
(information) button to display the
i
source information.
Pressing the
(information) button changes the display as
i
follows:
01
O
TV
or
VIDEO-1
VIDEO-1
Signal source
• The source information and current time switched by
(information) button.
i
• The source type :
TV/VIDEO-1/VIDEO-2/PC
• If the programme being watched does not have Teletext
transmission, only a box will be displayed at the same
location.
• When watching videos, an incorrect current time
is sometime displayed.
• In PC mode, the current time will not be displayed
__ : __
No display
11