Mounting / Removing Lens Cover - Kodak PIXPRO SP360 User Manual

Mounting / Removing Lens Cover

Removing lens cover:
Turn the lens cover according to the illustrated direction until it separates from the
SP360.
The lens cover protects the lens from being damaged (dustproof, shockproof and splashproof). Using the lens cover will not influence the image and video quality.
Before mounting the lens cover, make sure the lens surface is clean and dry. Always use a clean, lint-free dry cloth to clean the lens before shooting or recording so it
will not affect the photo or video quality.
When the SP360 is exposed to extreme temperature differences condensation may form inside of the lens cover. If this happens, remove the lens cover, and clean it
with a soft, dry, lint-free cloth, and then reinstall the lens cover.
If the SP360 will not be used for a period of time, always put the protective cover on it. (as shown in the figure).
Mounting lens cover
Turn and firmly tighten the lens cover according to the illustrated direction.
10