Using Interfacing; Micro Usb Interface; Charging; Using An External Power Supply - Kodak PIXPRO SP360 User Manual

Using Interfacing

Micro USB interface

Charging

13

Using an external power supply

In case of low battery power, or when a long-term power supply is needed, an external power supply (AC adapter, vehicle power supply, portable power supply or other
power unit) can be used instead of a battery. At this time, the setting of functions, photography, and other operations can be performed.
When powered on, use the Micro USB cable to connect the Action Cam to an external power supply. When connected with an external power supply, "
displayed on the LCD.
When powered off, use the Micro USB cable to connect the Action Cam to the external power supply. Press and hold the
external power supply, " " will be displayed on the LCD.
Requirements for the external power supply: output power of 5 V, output current of 1 A.
When powered on with a battery inserted, press and hold the
If the Action Cam was set to the Loop recording mode before shutdown, it will automatically start up and start recording when a Micro USB cable is connected to the
Action Cam and an AC adapter (or to an external power supply). (For example: when the Action Cam is connected to a vehicle power supply, it will start and record
automatically when the automobile starts. It will also stop recording, save the files, and power off one minute after the automobile shuts down.)

Data transmission

Use the Micro USB cable to connect the Action Cam to a computer and copy files from the Action Cam to the computer.
The steps are as follows:
1. Use the Micro USB cable to connect a computer (the computer should be on) to the Action Cam. During the connection, the Action Cam will display "Connecting ...", and
the computer will automatically detect the Action Cam.
2. Open the Action Cam folder on the computer to copy your files to the computer. After the transmission is completed, please unplug the USB cable in a safe manner
according to the computer's settings.
button to shut down and it starts to charge the battery.
" will be
button to power on. When connected to an
28