Table of Contents
Advertisement
Installing and Dismantling the Lens Cover
Dismantling the lens cover:
Turn the lens cover according to the illustrated direction until it separates
from the product.
The lens cover plays an important role in protecting the product (dustproof, shockproof and waterproof).
Before installing the lens cover, make sure that no dirt or foreign object is on the lens surface. Before taking pictures, please use a clean, dry, lint-free cloth
to clean the lens cover without affecting the product's viewfinding.
When the product is exposed to fluctuations in temperature, condensation may form on the inside surface of the lens cover. If this happens, remove the
lens cover, clean it with a soft, dry, lint-free cloth, and then reinstall the lens.
If the product will not be used for a length of time, the glass lens cover should be covered with a protective cover (as shown in the figure).
Installing the lens cover
Turn and firmly tighten the lens cover according to the illustrated direction.
10
Advertisement
Table of Contents
