Basic Operations; Turning On/Off The Unit; Inserting And Removing Discs - JVC LV42740-001A Instructions Manual

Basic operations

In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.

Turning on/off the unit

Press DVD STANDBY/ON
The STANDBY/ON indicator, which illuminates in red during the standby mode, lights in green, while each DISC indicator
(1 through 7) shows the current status of whether a disc is set or not in the corresponding tray.
TV DVD
STANDBY/ON
DISC
SELECT TV DVD
3D TV/VIDEO
REPEAT PHONIC CANCEL RETURN
TV1 TV2 TV3
1 2 3
TV4 TV5 TV6
4
5 6
TV7 TV8 TV9
7 8 9
TV -/-- TV0 MUTING
+10
10 0
• The first time you turn on the unit after connecting the power cord, the DISC indicators are illuminated until the unit detects that no
disc is set in the corresponding tray. Once detecting the status, the unit memorizes it unless you unplug the power cord, so the
DISC indicators show the status of corresponding trays correctly.
• You can directly turn on the unit by pressing the 3, DISC (1 through 7) or 0 (OPEN/CLOSE) button while the unit is on standby,
without pressing the DVD STANDBY/ON
unit after pressing these buttons while the unit is on standby is the same as pressing them while the power is on. See the following
description in which the unit is assumed that the power is on when starting operations.
NOTE
• Even if you press the DVD STANDBY/ON
the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit
consumes a very small amount of power.

Inserting and removing discs

Up to 7 discs can be set on the disc tray carousel.
STANDBY/ON
STANDBY/ON
1 Press 0 (OPEN/CLOSE) on the front panel.
The carousel opens and you can access to two of seven trays.
• From the second time on, the carousel opens with the previously played disc on the left-front tray.
26
on the remote control unit or press STANDBY/ON
DVD STANDBY/ON
on the remote control unit or STANDBY/ON
or STANDBY/ON
DISC 1 DISC 2 DISC 3 DISC 4
DVD AUDIO/DVD VIDEO/CD PLAYER
DVD AUDIO PROGRESSIVE
DISC 1 DISC 2
STANDBY/ON
STANDBY/ON
DVD AUDIO PROGRESSIVE
button to turn off the unit, the unit is not disconnected from
OPEN/CLOSE
DISC 5 DISC 6 DISC 7
EXCHANGE 0
DISC SKIP
PLAY
3
STOP PAUSE
7
7
- DISC 4
SKIP
PLAY & EXCHANGE
DVD / VIDEO CD / CD
EXCHANGE/ DISC SKIP button
on the front panel.
DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
EXCHANGE
DISC SKIP
DVD AUDIO/DVD VIDEO/CD PLAYER PLAY & EXCHANGE
DVD / VIDEO CD / CD
on the front panel. The behavior of the
0
(OPEN/CLOSE) button
8
¢
OPEN/CLOSE
0
PLAY
3
PAUSE
STOP
7 8
7
- DISC 4 ¢
SKIP