Getting Started; Connections; Before Making Any Connections; To Connect To A Conventional Tv - JVC LV42740-001A Instructions Manual

Dvd audio/video player
Table of Contents

Advertisement

Getting started

Connections

*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.

To connect to a conventional TV

You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT
jacks to your separate audio equipment. (See the following pages.)
The unit
AUDIO OUT
CENTER
SUBWOOFER
DIGITAL OUT
REAR
VIDEO
PCM / STREAM
RIGHT
LEFT
COAXIAL OPTICAL
FRONT
RIGHT
LEFT
S-VIDEO
Red
White Yellow
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using the S-video cable (optional) in addition to the (standard) video connection.
NOTES
• When connecting to a TV using the VIDEO OUT jack, make sure that the PROGRESSIVE indicator on the front panel is not lit. If
it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, see "How to
make the Progressive scan mode active" on page 18.
• When making the audio connection using the FRONT (LEFT and RIGHT) jacks, set "DOWN MIX" in "PREFERENCE 2" to "Lo/
Ro" and the Speaker setting in "SPK. SETTING" to "2 CH." (see page 60 and 62).
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
VIDEO OUT
AV COMPU LINK
COMPONENT
Y
P
P
B
R
S-video cable
(not supplied)
Audio/Video cable
(supplied)
If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See "AV COMPU LINK remote control
system" on page 67 for details.
T V
IN
S-VIDEO
Yellow
VIDEO
LEFT
White
RIGHT
Red
English
AUDIO
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv-fa90bkXv-fa95gdXv-fa92sl

Table of Contents