Wall Mounting - ClearSounds Geemarc PhotoPHONE 100 Manual

INSTALLATION

Wall Mounting

Slide the handset hanger tab out and reverse its position (rotate it
180 degrees). Slide it back into place so that the hook points up
(see diagram 1). This will keep the handset from falling out of the
cradle when it is mounted on the wall.
Install two self-tapping screws (not supplied) at a distance of 80
mm from each other and located on a vertical line.
Place the phone onto the screw-heads and slide down to secure
(see diagram 2).
Turn the hook in the receiver cradle so that the receiver can be
placed on-hook.
Diagram 1
Diagram 2
8