Modifying The Temperature Steps - Temp Menu Item - Gira 2370 Operating Instructions Manual

Modifying the temperature steps – tEMP menu item
You can modify the temperature steps in the tEMP menu item:
• Comfort temperature (default 21.0°C)
• Cooling temperature (default 24.0 °C)
• Lowering temperature (default 18.0°C)
• Anti-freeze temperature (default 10.0°C)
1. Press P for 5 seconds.
2. Press + to switch from Uhr to tEMP and confirm with S.
✓ The temperature setting of the comfort tem-
perature is displayed flashing. In addition the
operating mode is displayed at the right-hand
display margin.
3. Set the desired comfort temperature with +
or - and confirm with S.
✓ The next temperature step is displayed (cooling temperature).
4. Set the cooling temperature and then the lowering temperature and
anti-freeze temperature with + / - and confirm with S.
✓ After the last confirmation with S the Uhr menu item is displayed.
5. Return to the normal view with P.
i
Comfort/cooling temperature display
When setting the comfort temperature or cooling temperature, an 'H' (com-
fort temperature) or a 'C' (cooling temperature) is displayed each time at top
left.
8
i
Checking the anti-freeze temperature
The anti-freeze temperature can be checked and set again in the "Anti-
freeze function" menu item. A change in the anti-freeze temperature in one
of the menu items has a direct effect on the other respective menu item.
Only one anti-freeze temperature is valid in a room temperature controller.
In Cooling operating mode, anti-freeze temperature is permanently set to
+49°C.
Aborting modifications to the temperature steps
1. P aborts setting the temperature steps.
✓ The Uhr menu item is displayed. The modification to the previously
opened temperature step is not saved.
2. Return to the normal view with P.