Page 1
User’s guide ‘‘SEFL’’ series Electric furnace This guide must be read carefully by the installer. Then, the installer must give it to the user. (Replacement component list included) This unit is approved according to the Canadian and American manufacturing standards.
Page 2
WARNING WARNING WARNING WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product. This product must be installed by a qualified person and connected by a certified electrician, according to the electrical and building codes effective in your region.
Preventive maintenance Do not try to repair your furnace yourself. Call a qualified technician. However, before calling a technician, check the following points. 1) Make sure fuses or circuit breakers are activated. 2) Adjust the temperature set point of the thermostat above the ambient temperature. If heating does not start, cut off the power supply and call a techni- cian.
Moreover, it does not cover the cost of disconnection, transport, and installation. The warranty is limited to the repair or the replacement of the unit or the refund of its purchase price, at the discretion of Stelpro. Any parts replaced or repaired within the warranty period with the written authorization of Stelpro will be warranted for the remainder of the original warranty period.
Need help?
Do you have a question about the SEFL series and is the answer not in the manual?
Questions and answers