6.2.2 Cleaning Work - defenser PH15 Operating Instruction

30
6.2.2 Cleaning work
Unit component
Centrifuge
Droplet trap
Mat holder
Base tub cover
Base tub
Water tank
Flock-coated evaporator mat
(activated carbon evaporator mat)
Air intake and air outlet lattices
What to clean and how to clean
• Wash parts with a lukewarm soap solution and rinse well
with tap water. Additionally clean the centrifuge inside
with the brush supplied.
• Occasionally remove scale coating with a household
decalcify agent (observe safety notes in chapter 6.6).
Finally rinse the parts well with tap water.
• Flush water tank with a lukewarm soap solution and
rinse well with tap water.
• Wash screw cap with a lukewarm soap solution and
rinse well with tap water.
Occasionally remove scale coating with a household
decalcify agent (observe safety notes in chapter 6.3).
Finally rinse the screw cap well with tap water.
• Rinse the evaporator mat thoroughly with lukewarm
water without any additives.
Note: As soon as the filter replacing message appears
in the display (see error messages in chapter 7) replace
the evaporator mat together with the filters.
• Clean the air intake and air outlet lattices on both sides
with a vacuum cleaner.