Unit Settings (Normal Operating Mode); Setting The Desired Humidity Value - defenser PH15 Operating Instruction

20
5.4

Unit settings (normal operating mode)

5.4.1

Setting the desired humidity value

Standard operating display
(see chapter 5.4.2)
Note: The reference humidity value can be modified only if program mode is deactivated (see chap-
ter 5.5).
Setting range:
Factory setting:
Notes on setting:
Note: After initial commissioning or replacement of the vaporizer mat the humidification perform-
ance of the Defensor PH15/PH15A will be slightly reduced be c ause the evaporator mat takes a
few days to become fully saturated with water. Maximum performance is available after one week,
approximately.
Furthermore, the humidification performance depends on the ambient tem p e r ature.
Set value
45%rH
30...90 %rH
45 %rH
The optimum reference value depends on various factors. For apartments we
recommend a value of 40 – 45 %rH.
modify
confirm
Set value
New Value
cancel
Set value
Old Value
Set value
45%rH
30...90 %rH