Battery - Minolta data memory back dm9 Instruction Manual

DM9E 12/15/98 11:37 AM Page 8

BATTERY

The Data Memory Back DM-9 uses one CR2025 lithium
battery.
appears in the
data panel if the battery is
correctly installed.
8
1. Slide the battery cover in
the direction indicated.
2. Remove the old battery
and replace it with a new
one.
• The + side should face up.
3. Replace the battery
cover.
• Reset the date, time.
When replacing the battery...
• 1~2 rolls can be taken after bAttEry starts blinking in the DM-
9 data panel.
• Reset the date,time, data number ON/OFF, count-up
number, fixed number, and the exposure intensity after
replacing the battery.
Insert a SmartMedia card before removing the
battery.
• blinks in the data panel and the data number will
not be imprinted (p.36) if a card is not installed when the
camera back is closed.
Auto Power Off
The Data Memory Back DM-9 shuts down if it is not
operated for more than 4 minutes. Press any button on
the DM-9 or the camera body to restore power.
• Data will not be recorded to the SmartMedia card if
the last frame's exposure time is longer than four
minutes.
To record the data
1. Remove the rewound film.
2. Close the back cover (do not load a new roll).
3. Open the control panel door, then press the
rewind button.
• Data is recorded to the SmartMedia card.
• appears in the DM-9 data panel.
Replace the battery
when blinks in
the DM-9's data panel.
9