Updating The Data Items - Minolta data memory back dm9 Instruction Manual

DM9E 12/15/98 11:37 AM Page 34
IMPRINTING BETWEEN THE FRAMES

Updating the Data Items

The values of the data items need to be reset after replacing
the battery in the DM-9 Data Memory Back.
• When the Fixed or Count-up number data items are selected,
pressing the + and – buttons for 2 seconds resets the fixed or
count-up numbers to 00001.
• After updating the time, press the mode button to sync the
seconds counter to 00 (not shown).
34
1. Press the MODE button
to select the data item
you want to update.
2. Press SELECT button to
choose the item you
want to change.
• The selected item will blink.
3. Press the + and –
buttons to change the
value of the blinking
item.
• Press and hold the + or – button
to change the value rapidly.
4. Repeat steps 2 and 3
until all the data is
correct.
5. Press the select button
until all the data stops
blinking or press the
MODE button.
35