Removing The Smartmedia Card - Minolta data memory back dm9 Instruction Manual

DM9E 12/15/98 11:37 AM Page 26
RECALLING DATA
• appears in the
camera's data panel.
• L appears below READ in the
DM-9's data panel.
26
8. Open the camera's
control panel door and
press the adjust button.
9. Turn either control dial
to select data memory
On or Off, then press the
shutter-release button
partway down to enter
the selection.
• Or press the shutter-release
button partway down to return to
standard operation mode with
data memory on.

REMOVING THE SmartMedia CARD

Do not remove the card if
or is blinking in
the DM-9's data panel.
1. Turn the camera's main
2. Open the card-slot door
• Do not touch the electrical
• Store the card in its anti-
Data is written to the SmartMedia card after the
last exposure is taken and before the film is
rewound.
• All stored data is written to the card loaded when the film
is rewound.
switch to LOCK.
and remove the card.
contact area.
static case.
27