Recalling Data - Minolta data memory back dm9 Instruction Manual

DM9E 12/15/98 11:37 AM Page 22

RECALLING DATA

22
1. Open the control panel
door, then press the
data-memory button.
2. Turn either control dial
until and the
desired film area appears
in the camera's data
panel.
- Turn the front control dial to
change the film area
increment by one.
- Turn the rear control dial to
change the film area
increment by ten.
• The data number
corresponding to the selected
film area appears in the
DM-9's data panel.
• L appears under READ in the
DM-9's data panel.
3. Press the adjust button
to view the film areas.
• blinks in the camera's
data panel.
• L blinks under READ in the
DM-9's data panel.
4. Turn the front control
Shutter Speed
Aperture
Frame Number
5. Turn the rear control dial
• The exposure compensation
Focal Length
Exposure Compensation/
Bracketing Increment
Continued on following page
dial to select the
desired frame number.
– The shutter speed and
aperture for the selected frame
are displayed in the data
panel.
one click to display the
focal length and
exposure compensation/
bracketing increment for
the selected frame.
and bracketing increment are
combined into a single value.
23