Hitachi es50-116cmw User Manual page 10

!USER" mode # Names and Functions of Each Part
!
"
#
$
%
&
! POWER(STANDBY/ON) BUTTON
+Turns the projector on and off.
(Turning off will set to standby status) (See p.15)
" BLACK LEVEL BUTTONS
+Adjusts the black level of screen. (See p. 18)
# RGB BUTTON
+Switches the input (See p. 16, p. 22,24)
$ PICTURE BUTTONS
+Adjusts the brightness of image (See p. 18)
% MENU BUTTON
+Displays the adjustment menu screen.
+Pressing MENU when the adjustment menu screen
appears will store the adjusted value of the menu item
in memory, and then return the cursor to one item
before.(See p. 17)
& DISK PAD
+Used to select menu item and adjust when the menu
screen appears (See p. 17).
Note:The arrow keys in the text (
correspond to the operation of upper, lower, left
and right keys on disk
' TIMER BUTTON
+Displays the accumulated projector operation hours
and lamp use time on the menu screen (See p. 21)
( MUTE
+Has no function.
) MODE SELECT SWITCH
+If you use the remote controller in the "USER " mode,
set the slide switch on the right side to "USER".
* VOLUME BUTTON
+Has no function.
)
'
(
)
*