Using The Hdmi Terminal - JVC PD-Z50DX4/S Service Manual

Additional preparation

Using the HDMI terminal

Connecting a HDMI compatible device
Connecting a HDMI compatible device such as a DVD player or DVR allows you to display high
definition pictures on your TV in their digital form.
Connect the HDMI cable from the digital out on the back of your HDMI device to the
HDMI terminal on the back of the receiver.
When you connect as shown above, set AUDIO in HDMI SETTING menu in the SET UP menu
to DIGITAL. Refer to "Setting HDMI SETTING" below.
• To connect the DVI device to the HDMI terminal, connect the DVI terminal of DVI device to the
HDMI terminal of the receiver with the DVI-HDMI converter cable, and the audio output
terminal of the DVI device to the DVI ANALOG AUDIO IN L/R terminal of the receiver with
the audio cable.
When these connections are made, set AUDIO in HDMI SETTING menu to ANALOGUE.
Refer to "Setting HDMI SETTING" below.
• The HDMI terminal is not compatible with the picture signal of a personal computer.
The HDMI of the TV is compatible with the following video signals.
VGA
480i/60Hz
480p/60Hz
576i/50Hz
Setting HDMI SETTING
1 Press the H button and display the menu bar, press the 5 buttons and
choose SET UP, and press the 6 buttons and choose HDMI SETTING, and
press then a button
The HDMI SETTING menu appears.
> HDMI SETTING
SIZE
AUDIO
OK
D0060-EN
50
HDMI compatible device
DIGITAL OUT
HDMI cable
640 × 480
4:3
4:3
4:3
1
DIGITAL
VIDEO AUDIO
DIGITAL DIGITAL
HDMI
Back of the receiver
576p/50Hz
1080i/50Hz
1080i/60Hz
4:3
16:9
16:9