Lenovo S20-00 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. S20-00
  6. Hardware maintenance manual

Lenovo S20-00 Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Lenovo S20-00 All-In-One PC Hardware
Maintenance Manual
Machine Types: F0AY [S20-00]

Advertisement

Table of Contents
loading

Related Manuals for Lenovo S20-00

Summary of Contents for Lenovo S20-00

  • Page 1 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual Machine Types: F0AY [S20-00]...
  • Page 3 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual Machine Types: F0AY [S20-00]...
  • Page 4 Second Edition (September 2014)12th © Copyright Lenovo 2014, 2014. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No.

  • Page 5: Table Of Contents

    Changing booting mode ... Information ....45 Exiting the Lenovo BIOS Setup Utility program . . Chapter 6. Symptom-to-FRU Index . . 19...
  • Page 6 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    This manual contains service and reference information for Lenovo S20-00 All-In-One computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information.
  • Page 8 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 9: Chapter 2. Safety Information

    Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect any attached power cords, telecommunication cables, network cables, and modem cables before you open the computer covers, unless instructed otherwise in the installation and configuration procedures. © Copyright Lenovo 2014, 2014...
  • Page 10 – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Use caution; do not become a victim yourself. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 11: Safety Inspection Guide

    – Switch off power. – Send another person to get medical aid. Safety inspection guide The intent of this inspection guide is to assist you in identifying potential hazards posed by these products. Each computer, as it was designed and built, had required safety items installed to protect users and service personnel from injury.

  • Page 12: Grounding Requirements

    • Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 13 To Connect To Disconnect 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2. First, remove power cords from outlets. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power cords to outlet. 4.
  • Page 14 To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 15: Chapter 3. General Information

    This section lists the physical specifications. Environment Air temperature: Operating: 10° to 35°C Transit: -20° to 55°C Humidity: Operating: 35% to 80% Transit: 20% to 90% (40°C) Altitude: 86KPa to 106KPa Electrical input: Input voltage: 90V-264V(AC) Input frequency: 47Hz-63Hz © Copyright Lenovo 2014, 2014...
  • Page 16 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 17: Chapter 4. General Checkout

    • If the computer displays a POST error, go to “POST error codes”. • If the computer hangs and no error is displayed, continue at step 7. 7. If the test stops and you cannot continue, replace the last device tested. © Copyright Lenovo 2014, 2014...
  • Page 18 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 19: Chapter 5. Using The Setup Utility

    1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer. 2. Press and hold the F1 key then turn on the computer. When the Lenovo BIOS Setup Utility program is displayed, release the F1 key.
  • Page 20 Administrator Password if you are responsible for maintaining the settings of several computers. After you set an Administrator Password, a password prompt is displayed every time you access the Lenovo BIOS Setup Utility program. If both the Administrator and Power-On Password are set, you can type either password. However, you must use your Administrator Password to change any configuration settings.

  • Page 21: Enabling Or Disabling A Device

    Power-On Password When a Power-On Password is set, you cannot start the Lenovo BIOS Setup Utility program until a valid password is typed from the keyboard. Setting, changing, or deleting a Power-On Password Note: A password can be any combination of letters and numbers up to 16 characters (a-z and 0-9).

  • Page 22: Selecting A Startup Device

    Select Network Setup, press the Enter key, then select Onboard Ethernet Support or LAN Boot Agent. 4. Select Disabled or Enabled and press the Enter key. 5. Return to the Lenovo BIOS Setup Utility program menu and select the Exit option. 6. Select Save Changes and Exit from the menu. Notes: a.

  • Page 23: Changing Booting Mode

    Exiting the Lenovo BIOS Setup Utility program After you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utility program main menu. You might have to press the Esc key several times. Do one of the following: •...
  • Page 24 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 25: Chapter 6. Symptom-To-Fru Index

    Check that the following are properly installed: Reseat connectors • Power Cord • On/Off Switch connector • System Board Power Supply connectors • Microprocessor connections Check the power cord. Power Cord Check the power-on switch. Power-on Switch © Copyright Lenovo 2014, 2014...

  • Page 26: Post Error Codes

    3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or component. If all devices and components have been removed and the problem continues, replace the system board. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 27: Chapter 7. Replacing Hardware

    Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer. To obtain copies of the Safety and Warranty Guide, go to the Support Web site at: http://support.lenovo.com. Note: Use only parts provided by Lenovo.

  • Page 28: Replacing The Keyboard And Mouse

    Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.
  • Page 29 Step 4. Remove the two screws that secure the rear cover to the front bezel. Step 5. Use a flat head screwdriver push into the slot in-between the rear cover and front bezel, and separate the rear cover from the front bezel. Step 6.

  • Page 30: Replacing A Memory Module

    Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 31 Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right view” and “Rear view” for help with locating the various connectors. Step 4.

  • Page 32: Replacing The System Fan

    To replace the Wi-Fi card: Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 33: Replacing The Speaker System

    Step 2. Unplug all power cords from electrical outlets. Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right view” and “Rear view”...

  • Page 34: Replacing The Power Switch Board

    Refer to “Left and right view” and “Rear view” for help with locating the various connectors. Step 4. Remove the rear cover. Refer to "Removing the rear cover". Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 35: Replacing The Motherboard Or Heat-Sink

    Step 5. Disconnect the power switch board cable from the connector. Step 6. Remove the two screws that secure the power switch board to the rear cover and lift up the power switch board to remove it. Step 7. To install the power switch board: Line up the holes on the new power switch board with the mounting holes on the rear cover and secure the new power switch board with the two screws.
  • Page 36 Step 7. Remove all the cables connected to the motherboard. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 37 Step 8. Remove the eight screws that secure the motherboard to the rear cover and lift it up to remove it. Step 9. Remove the heat-sink from the motherboard as shown. Step 10. To install the new motherboard or heat-sink: Attach the heat-sink to the motherboard.

  • Page 38: Replacing The Camera

    Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 39: Replacing The Led Panel

    Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right view” and “Rear view” for help with locating the various connectors. Step 4.
  • Page 40 Step 6. Remove the two screws that secure the converter bracket to the front bezel. Lift up the bracket to remove it. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 41 Step 7. Remove the tape that secures the LVDS cable to the connector. Step 8. Press the pins to unlock the LVDS cable from the connector on the LED panel , then pull it out as shown. Step 9. Press the pin to unlock the converter cable from the connector on the LED panel, then pull the converter cable out as shown.
  • Page 42 Attach all the cables to the new LED panel. Reattach the converter bracket to the front bezel. Reattach the converter board to the bracket. Step 13. Reattach the rear cover and secure it with the screws. Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 43: Chapter 8. Fru Lists

    Chapter 8. FRU lists This chapter lists the information on the field replaceable units (FRUs) for Lenovo S20–20 All-In-One desktop computers. Attention: Be sure to read and understand all the safety information before replacing any FRUs. Notes: FRUs that have a 1 or 2 in the CRU column are Customer Replaceable Units (CRUs).
  • Page 44 Seagate Pharaoh 4K,ST500DM002,SATA3.0 500GB 7200 16200178 RPM/6Gb 4K Seagate Pharaoh 4KNonMC, ST500DM002, SATA3.0 500GB 16200674 7200RPM/6Gb DT01ACA050,Toshiba,SATA3.0 500GB 7200 RPM/6Gb 4K 16200512 Seagate Grenada BP 1.5,ST1000DM003,SATA3.0 1TB 7200 16200528 RPM/6Gb 4K Toshiba,DT01ACA100,SATA3.0 1TB 7200 RPM/6Gb 4K 16200513 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 45 WD XL1000B, WD10EZEX08M2NA0, SATA3.0 1TB 7200 16200613 RPM/6Gb 4K UJ8FB 25215310 GU90N 25214073 DU8A5SH(LSOPU) 25214499 Power Delta ADP65FD BE 65W adapter 36200352 Liteon PA165072IA 65W adapter 36200353 DELTA ADP90XD BC 90W common adapter ® 36200415 Liteon PA190072IA 90w common adapter® 36200416 C Board S2000 Power 5C50G56338...
  • Page 46 Liteon SK8821 (FR)NewF5 USB KB Win8 SD50F63286 GB SK8821 (IT)NewF5 USB KB SD50G05-079 Primax LXB-MOEUUO USB Mouse 25011050 25011051 Logitech LXB-M-U0025-O USB Mouse Newmen MS-370 mouse black logo 25216221 25210791 Primax Ultraslim plus wireless KB+MC LC8 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 47 Primax Edge 2.4G KB+MC(EN) CALC8 25211201 25214493 Primax Edge 2.4G KB+MC(IN) CALC8 Primax Edge 2.4G KB+MC(RU) CALC8 25214494 25214495 Primax Edge 2.4G KB+MC(UK) CALC8 Primax Edge 2.4G KB+MC(TR) CALC8 25214496 25216246 Primax Edge 2.4G KB+MC(CZ) CALC8 Primax Edge 2.4G KB+MC(TH) CALC8 25216247 25216342 Primax Edge 2.4G KB+MC(SA) CALC8...
  • Page 48 LW Black single head1.0m Israel C5 Power cord® 31039107 LX(BS)1.0M C5 Israel Power cord 31503362 HLS1MC5 Israel Power cord 31049502 LW Black single head1.0m Taiwan C5 Power cord® 31038885 31503354 LX(BS)1.0M C5 TW Power cord Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...
  • Page 49 HLS1MC5 TW Power cord 31049499 31039106 LW Black single head1.0m Korea C5 Power cord® LX(BS)1.0M C5 Korea Power cord 31503358 31049498 HLS1MC5 Korea Power cord LW Black single head1.0m SA C5 Power cord® 31039105 31503355 LX(BS)1.0M C5 SA Power cord HLS1MC5 SA Power cord 31049501 Chapter 8...
  • Page 50 Lenovo S20-00 All-In-One PC Hardware Maintenance Manual...

  • Page 51: Chapter 9. Additional Service Information

    • Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event , a daily event or a weekly event. • Wake Up on LAN: This feature allows LAN adapter card to wake the System. © Copyright Lenovo 2014, 2014...

Table of Contents