Table of Contents
Advertisement
Step 4.
Remove the two screws that secure the rear cover to the front bezel.
Step 5.
Use a flat head screwdriver push into the slot in-between the rear cover and front bezel, and
separate the rear cover from the front bezel.
Step 6.
Disconnect the LVDS cable to separate the rear cover from the front bezel.
Step 7.
To reattach the rear cover:
a.
Line up the rear cover with the front bezel and reconnect the LVDS cable.
b.
Line up the holes on the rear cover with mounting holes on the front bezel, and place the rear
cover into position.
c.
Secure the rear cover to the front bezel with the two screws.
.
Chapter 7
Replacing hardware
23
Hide quick links:
Advertisement
Table of Contents
